Home / Solutions / Lightning Protection Monitoring for Expressway Toll Stations and Service Areas

Lightning Protection Monitoring for Expressway Toll Stations and Service Areas

Lightning protection monitoring for expressway toll stations and service areas should deploy FS, FSS, FL and FRP in station groups, and can use FG or a platform to aggregate data along the route. Focus on confirming power supply, communication, pole structures and outdoor protection conditions; alarms are layered by road segment and station, to avoid mistaking communication offline for lightning-protection failure.

Lightning Protection & GroundingLightning Protection Monitoring

Solution overview

This solution is for unified lightning-protection O&M of scattered stations along the route. Implementation should proceed in batches by road segment and station, keeping coding, alarm and inspection processes consistent.

Applicable industries

  • Expressways

Primary user roles

  • Mechanical and Electrical O&M
  • Traffic Informatization Engineer
  • Project Integrator

Problems addressed

  • Toll-station and service-area stations are scattered, and SPD, grounding and lightning states rely on station-by-station inspection.
  • Power-supply and communication conditions along the route are inconsistent, and fixed and mobile networks may be used in a hybrid manner.

Recommended product combination

FS

FS SPD Monitoring Module

Used to collect telemetry signals, circuit breaker, grounding or lightning strike count states from existing SPDs; specific capabilities, power supply and communication suffixes are to be confirmed by the FS model.

FRP

FRP Loop-Method Grounding Resistance Monitor

Used for loop-method grounding resistance or grounding continuity monitoring; installation method, range, protection and explosion-proof conditions are verified by the specific model.

System architecture and data flow

Lightning Protection Monitoring for Expressway Toll Stations and Service Areas System TopologyFour-layer data flow across perception, edge control, platform and application for Lightning Protection Monitoring for Expressway Toll Stations and Service Areas.01Perception layer
Configure FS, FSS, FL or FRP according to the station's power distribution, SPD, grounding and lightning pat…
02Edge / control layer
FG or a confirmed in-station gateway is responsible for local aggregation and communication.
03Platform layer
The platform displays alarm and offline states by road segment, station and device tier.
04Application layer
Mechanical and electrical O&M assigns verification tasks by road segment, and retains handling and maintenan…

Perception layer

Configure FS, FSS, FL or FRP according to the station's power distribution, SPD, grounding and lightning path.

Edge / control layer

FG or a confirmed in-station gateway is responsible for local aggregation and communication.

Platform layer

The platform displays alarm and offline states by road segment, station and device tier.

Application layer

Mechanical and electrical O&M assigns verification tasks by road segment, and retains handling and maintenance records.

Data flow

  1. A station lightning-protection or grounding monitoring point changes.
  2. In-station devices acquire the corresponding states.
  3. FG aggregates and uploads using the available network.
  4. The platform forms alarms by road segment and station.

Integration and interfaces

  • Confirm the power supply, fixed-network or mobile-network conditions of each station.
  • When integrating with the mechanical-and-electrical O&M platform, unify station coding and alarm levels.
  • Installation of devices along the route requires verification of pole structures, cabinets and outdoor protection conditions.

Applicable standards

  • JTG technical standards related to highway mechanical and electrical engineering (final version and applicable chapters to be confirmed by the project)
  • GB 50057 Design Code for Lightning Protection of Buildings (applicable clauses to be confirmed by the design documents of facilities along the route)

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Each point uniquely corresponds to a road segment, station and device.
  • Station offline, communication interruption and lightning-protection alarm can be distinguished.
  • Batch expansion follows the same coding and alarm process.

Limitations and exclusions

  • In-station communication offline cannot be automatically interpreted as a lightning-protection device failure.
  • Installation of devices along the route must not affect traffic mechanical-electrical and pole-structure safety.
  • When environmental differences between stations are large, the installation list cannot be copied directly.

Operational value

  • Reduces the blindness of station-by-station inspection at stations along the route.
  • Supports arranging lightning-protection maintenance by road segment.
  • Forms station lightning-protection historical records.

Selection guidance

  • Evaluate FSS or FS for new or existing SPD circuits respectively.
  • Select the specific FL and FRP models according to the grounding and lightning paths.
  • For stations with unstable communication, first confirm local caching and retransmission capabilities.

Typical implementation patterns

  • A typical implementation pattern is to first complete point piloting at one toll station and one service area.
  • Another pattern integrates by road segment in batches, unifying station and device codes.

Before retrofit → With the solution

Before retrofit

  • Toll-station and service-area stations are scattered, and SPD, grounding and lightning states rely on station-by-station inspection.
  • Power-supply and communication conditions along the route are inconsistent, and fixed and mobile networks may be used in a hybrid manner.

With the solution

  • Reduces the blindness of station-by-station inspection at stations along the route.
  • Supports arranging lightning-protection maintenance by road segment.
  • Forms station lightning-protection historical records.

How to evaluate the effect

01

Measurable signal

Configure FS, FSS, FL or FRP according to the station's power distribution, SPD, groundi…

02

Data source

FS SPD Monitoring Module · FSS Smart Surge Protective Device (Flagship)

03

Review method

Each point uniquely corresponds to a road segment, station and device.

04

Acceptance boundary

In-station communication offline cannot be automatically interpreted as a lightning-protection device failure.

Frequently asked questions

Can 4G replace the wired network?

It can be evaluated according to station conditions, but coverage, tariff, caching and retransmission strategies must be defined.

Does each station need to be equipped with a platform?

No. In-station devices can aggregate and then connect to a unified platform, depending on the network and deployment method.

How are alarms assigned?

It is recommended to configure responsible persons by road segment, station and device tier, to avoid all alarms being concentrated in one account.

What devices does "lightning protection monitoring for expressway toll stations and service areas" typically consist of?

FS: collects telemetry signals, circuit breaker, grounding or lightning strike count states from existing SPDs; specific capabilities, power supply and communication suffixes are confirmed by the FS model; FSS: as an integrated smart SPD combining protection and condition monitoring, selected by number of poles, protection parameters and circuit conditions; FL: records events such as lightning current peak and energy; indoor/outdoor model, range, protection rating and installation orientation are confirmed by the datasheet; FRP: used for loop-method grounding resistance or grounding continuity monitoring, with installation method, range, protection and explosion-proof conditions verified by the specific model.

What site conditions should be verified before implementing "lightning protection monitoring for expressway toll stations and service areas"?

Evaluate FSS or FS for new or existing SPD circuits respectively; select the specific FL and FRP models according to the grounding and lightning paths; for stations with unstable communication, first confirm local caching and retransmission capabilities.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK