Home / Solutions / Commercial Building Floor and Tenant Power Distribution Monitoring

Commercial Building Floor and Tenant Power Distribution Monitoring

Commercial building floor and tenant power distribution monitoring should simultaneously handle the three lines of metering, safety, and permissions. SFA is used for electrical and anomaly monitoring of key circuits; ESF and EST are used for residual current and temperature; ZSA or DDSU1589 can participate in merchant or sub-metering based on metering hierarchy and interface needs; ESX and the platform complete aggregation. The project must clarify the ownership, data visibility scope, alarm responsibility, and fee settlement boundaries of the main meter, public areas, and tenant circuits; the same set of page permissions must not be used to open all data to property management and tenants.

Electrical HazardsStatus Visualization

Solution overview

The solution manages floor power distribution, tenant metering, and public-area safety data in layers, both retaining energy consumption information and avoiding neglect of leakage current and temperature rise.

Applicable industries

  • Commercial Buildings

Primary user roles

  • Electrical Operations and Maintenance
  • Safety Management Personnel
  • Design Institute

Problems addressed

  • Data of tenant circuits, public areas, and property circuits is mixed together, with unclear sub-metering and permissions.
  • Leakage current, temperature, and branch status lack a unified platform, making it difficult to locate anomalies promptly after they occur.

Recommended product combination

System architecture and data flow

Commercial Building Floor and Tenant Power Distribution Monitoring System TopologyFour-layer data flow across perception, edge control, platform and application for Commercial Building Floor and Tenant Power Distribution Monitoring.01Perception layer
SFA, ESF, EST, and metering terminals collect data in floor cabinets, tenant cabinets, and public areas.
02Edge / control layer
ESX aggregates by floor or power distribution zone, executing alarms and caching.
03Platform layer
FEXLINK divides views and permissions by property, floor, tenant, and circuit.
04Application layer
Property management handles public alarms, tenants view authorized data, and O&M personnel perform maintenan…

Perception layer

SFA, ESF, EST, and metering terminals collect data in floor cabinets, tenant cabinets, and public areas.

Edge / control layer

ESX aggregates by floor or power distribution zone, executing alarms and caching.

Platform layer

FEXLINK divides views and permissions by property, floor, tenant, and circuit.

Application layer

Property management handles public alarms, tenants view authorized data, and O&M personnel perform maintenance.

Data flow

  1. Terminals collect metering, safety, and status data.
  2. The floor or zoned gateway aggregates and uploads.
  3. The platform organizes data by property rights and tenant relationships.
  4. Different roles view alarms and reports by permission.

Integration and interfaces

  • A list of floors, tenants, circuit ownership, and metering boundaries must be provided.
  • The meter interface, rate rules, platform accounts, and tenant data permissions must be confirmed.
  • When connecting to property or billing systems, the data direction, reconciliation, and exception handling processes should be verified.

Applicable standards

  • The GB/T 16895 series and applicable standards related to low-voltage power distribution and electrical energy metering; the final version and commercial settlement rules are to be confirmed by the project.

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Verify the correspondence between floors, tenants, circuits, and meters.
  • Verify sub-metering, leakage/temperature alarms, and platform permissions.
  • Check the isolation and visibility scope of public-area and tenant data.
  • Deliver the property-rights boundary list, point list, configuration records, and acceptance documentation.

Limitations and exclusions

  • Do not promise precise allocation to unmetered tenant devices through main-circuit data.
  • The scope of tenant data openness must be explicitly authorized by the owner or management party.
  • Metering accuracy, rates, leakage, and temperature capabilities are subject to the specific model and project rules.

Operational value

  • Establish a layered data view of floors, public areas, and tenants.
  • Place metering information and electrical safety alarms in the same O&M context.
  • Reduce data reconciliation costs among property management, tenants, and O&M.

Selection guidance

  • First select ZSA or DDSU1589 based on metering boundaries, then select SFA, ESF, and EST based on safety requirements.
  • Plan gateways, platform accounts, and permissions based on floors and property-rights relationships.
  • Tenant billing functions should be confirmed separately from device monitoring, avoiding treating the monitoring platform as a settlement system.

Typical implementation patterns

  • A typical implementation model is to sort out circuits by floor and property-rights boundaries, prioritize deploying safety monitoring in public areas, configure metering in tenant circuits according to billing requirements, and establish tiered views on the platform. This description does not represent a specific commercial project.

Before retrofit → With the solution

Before retrofit

  • Data of tenant circuits, public areas, and property circuits is mixed together, with unclear sub-metering and permissions.
  • Leakage current, temperature, and branch status lack a unified platform, making it difficult to locate anomalies promptly after they occur.

With the solution

  • Establish a layered data view of floors, public areas, and tenants.
  • Place metering information and electrical safety alarms in the same O&M context.
  • Reduce data reconciliation costs among property management, tenants, and O&M.

How to evaluate the effect

01

Measurable signal

SFA, ESF, EST, and metering terminals collect data in floor cabinets, tenant cabinets, a…

02

Data source

SFA Multi-Parameter Electrical Controller · ESF Electrical Fire Monitoring Module · EST Multi-Channel Temperature Monitoring Module

03

Review method

Verify the correspondence between floors, tenants, circuits, and meters.

04

Acceptance boundary

Do not promise precise allocation to unmetered tenant devices through main-circuit data.

Frequently asked questions

Is the commercial building solution equivalent to a tenant billing system?

Not equivalent. Metering data can serve as a basis, but bills, rates, reconciliation, and charging require an independent system or interface.

Do public areas and tenant circuits need to be monitored separately?

They should be separated at least at the platform level, points, and permissions, to facilitate determining responsibility and handling processes.

How to choose between ZSA and DDSU1589?

Select based on single/three-phase, installation form, metering accuracy, communication, and metering hierarchy; cannot look only at the name.

Can tenants view other tenants' data?

Should not be allowed by default. The platform must restrict the data scope by tenant and role and record access permissions.

Who is responsible for handling leakage alarms?

The responsibilities of property management, tenants, and O&M parties should be clarified before project delivery and written into the alarm grading and handling procedures.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK