Home / Solutions / Booster Room and Transformer Power Distribution Monitoring

Booster Room and Transformer Power Distribution Monitoring

Booster room and transformer power distribution monitoring should focus on the LV side and lawfully accessible secondary data; the terminal should not be described as a transformer body diagnostic system. SFA can collect electrical parameters of key circuits and configured data such as temperature and residual current; ESF is used for electrical fire monitoring of residual current and temperature types; ESX aggregates and connects to the platform. Before the project starts, the boundaries of HV, transformer body, LV power distribution, and third-party protective devices must be defined, and CT, outage window, and existing monitoring interfaces verified.

Electrical HazardsStatus Visualization

Solution overview

The solution targets LV power distribution and auxiliary monitoring in booster rooms, focusing on in-cabinet terminals and communication aggregation, helping O&M personnel grasp incoming-line load, outgoing-line status, and anomaly trends.

Applicable industries

  • Data Centers and Computing Facilities

Primary user roles

  • Data Center Facilities O&M
  • Electrical Engineer
  • Weak-Current Engineer

Problems addressed

  • Incoming-line, transformer LV-side, and outgoing-line status are scattered, lacking a unified data view.
  • Anomalies in in-cabinet temperature, residual current, and switch status rely on manual inspection, with insufficient historical trends.

Recommended product combination

System architecture and data flow

Booster Room and Transformer Power Distribution Monitoring System TopologyFour-layer data flow across perception, edge control, platform and application for Booster Room and Transformer Power Distribution Monitoring.01Perception layer
SFA, ESF, and EST configured on demand collect LV circuits, residual current, temperature, and switch status…
02Edge / control layer
ESX aggregates data by room or cabinet row, supporting on-site alarm rules.
03Platform layer
FEXLINK displays device hierarchy, real-time data, trends, and alarms.
04Application layer
O&M personnel view load and anomalies by incoming line, transformer LV side, and feeder.

Perception layer

SFA, ESF, and EST configured on demand collect LV circuits, residual current, temperature, and switch status.

Edge / control layer

ESX aggregates data by room or cabinet row, supporting on-site alarm rules.

Platform layer

FEXLINK displays device hierarchy, real-time data, trends, and alarms.

Application layer

O&M personnel view load and anomalies by incoming line, transformer LV side, and feeder.

Data flow

  1. In-cabinet terminals collect electrical parameters, temperature, residual current, and switch status.
  2. ESX aggregates device data and executes on-site rules.
  3. Data is uploaded to the platform and associated with devices and circuits.
  4. The platform generates trends, alarms, and O&M records.

Integration and interfaces

  • The monitoring responsibilities and data sources of HV cabinets, transformer body, and LV cabinets must each be clarified.
  • The interfaces of CT, switching quantities, temperature probes, and existing protective devices must be confirmed.
  • When connecting to a room monitoring system, network isolation, account permissions, and point-list integration testing must be completed.

Applicable standards

  • GB 50054, the GB/T 16895 series, and applicable project-specific standards for power transformation/distribution and electrical fire monitoring; the final version is to be confirmed by the project.

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Verify the boundary list of HV, LV, and third-party devices.
  • Verify incoming-line, outgoing-line, temperature, and residual current data point by point.
  • Verify alarms and records after outage, communication interruption, and recovery.
  • Deliver the point list, wiring records, platform configuration, and integration test report.

Limitations and exclusions

  • Does not include body diagnostic capabilities such as transformer insulation, oil temperature, gas, or partial discharge.
  • HV-side access must comply with the project's electrical design and qualification requirements, and cannot be replaced by the LV monitoring solution.
  • The specific temperature range, current rating, and interface capabilities are subject to the selected model documentation.

Operational value

  • Centralize the LV-side status of the booster room on a unified platform.
  • Provide continuous records for load, temperature rise, and residual current anomalies.
  • Reduce the duplicate work of finding data across cabinets and on-site meter reading.

Selection guidance

  • First determine whether the monitoring object is incoming line, LV feeder, in-cabinet temperature, or switch status, then allocate products.
  • Transformer body diagnosis should use transformer-specific monitoring and protection data, not replaced by this solution.
  • Select the number of ESX units and uplink method based on the room network and platform architecture.

Typical implementation patterns

  • A typical implementation model is to deploy terminals in layers on the transformer LV side and key feeders, first collecting electrical parameters and in-cabinet anomalies, then connecting to the room platform through an edge gateway. This description only illustrates a reusable architecture and does not represent a specific project delivery result.

Before retrofit → With the solution

Before retrofit

  • Incoming-line, transformer LV-side, and outgoing-line status are scattered, lacking a unified data view.
  • Anomalies in in-cabinet temperature, residual current, and switch status rely on manual inspection, with insufficient historical trends.

With the solution

  • Centralize the LV-side status of the booster room on a unified platform.
  • Provide continuous records for load, temperature rise, and residual current anomalies.
  • Reduce the duplicate work of finding data across cabinets and on-site meter reading.

How to evaluate the effect

01

Measurable signal

SFA, ESF, and EST configured on demand collect LV circuits, residual current, temperatur…

02

Data source

SFA Multi-Parameter Electrical Controller · ESF Electrical Fire Monitoring Module · EST Multi-Channel Temperature Monitoring Module

03

Review method

Verify the boundary list of HV, LV, and third-party devices.

04

Acceptance boundary

Does not include body diagnostic capabilities such as transformer insulation, oil temperature, gas, or partial discharge.

Frequently asked questions

Can this solution monitor transformer oil temperature?

The general product combination does not automatically include transformer oil temperature capability. Dedicated sensors, interfaces, and transformer body technical conditions are required.

Can these terminals be installed directly inside HV cabinets?

Judgment should be made strictly based on HV equipment design, insulation distance, and construction qualifications; the LV monitoring solution cannot replace HV monitoring and protection design.

Can SFA and ESF be placed in the same cabinet?

They can be combined when space, power supply, wiring, and communication conditions are met, but their respective monitoring objects differ and they cannot replace each other.

Is it mandatory to connect to FEXLINK?

FEXLINK or a confirmed existing monitoring platform can be connected according to the project; the key is that points, protocols, and alarm responsibilities are clearly defined.

Why is a HV/LV boundary list required first?

Data sources, construction permissions, and protection responsibilities differ among systems; unclear boundaries easily cause duplicate collection or false alarms.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK