Home / Solutions / Solar Self-Consumption and Generation Monitoring

Solar Self-Consumption and Generation Monitoring

Solar self-consumption monitoring first separates generation, consumption, grid interconnection gateway and ownership boundaries. ESA and ESE can acquire electrical parameters and power quality data on confirmed circuits, CW aggregates field meters and connects inverter or third-party interfaces, and FEXLINK builds generation, consumption and boundary reconciliation. Inverter protocols, grid metering and ownership relationships must be confirmed by the project; the monitoring platform must not be treated directly as a grid control or settlement system.

Energy DataStatus Visualization

Solution overview

The solution focuses on metering boundaries and data reconciliation for generation and consumption visibility in self-consumption projects. Control and settlement capabilities are verified separately.

Applicable industries

  • Solar and storage

Primary user roles

  • Energy managers
  • Electrical O&M
  • Business management

Problems addressed

  • Generation, consumption and export metering boundaries are unclear
  • Inverter and gateway meter data differ in time or definition
  • The self-consumption ratio lacks a traceable calculation basis

Recommended product combination

FEXLINK

FEXLINK IoT Platform

Builds data views for generation, consumption, export and self-consumption ratio

System architecture and data flow

Solar Self-Consumption and Generation Monitoring System TopologyFour-layer data flow across perception, edge control, platform and application for Solar Self-Consumption and Generation Monitoring.01Perception layer
ESA, ESE and gateway meters cover generation, load and grid boundaries.
02Edge / control layer
CW aggregates data and handles inverter or third-party interfaces.
03Platform layer
FEXLINK maintains metering boundaries and calculation definitions.
04Application layer
Energy staff reconcile generation, self-consumption and export data.

Perception layer

ESA, ESE and gateway meters cover generation, load and grid boundaries.

Edge / control layer

CW aggregates data and handles inverter or third-party interfaces.

Platform layer

FEXLINK maintains metering boundaries and calculation definitions.

Application layer

Energy staff reconcile generation, self-consumption and export data.

Data flow

  1. Define the generation, load and grid metering points
  2. Acquire meter and inverter data
  3. Unify time, units and data periods
  4. Calculate generation, self-consumption and boundary differences
  5. Reconcile missing data and communication anomalies

Integration and interfaces

  • The inverter must provide a project-confirmed protocol, point list and access permission
  • Gateway meters and internal meters need clear metering boundaries and multipliers
  • Before connecting to settlement or production systems, confirm data use and responsibility

Applicable standards

  • Solar interconnection, metering and electrical design standards are confirmed against project location and grid requirements
  • Power quality monitoring requirements are confirmed by circuit and ESE model
  • Data units and statistical periods are frozen before the platform goes live

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Generation, load, grid and ownership boundaries are clearly mapped
  • Meter multipliers, units and time periods are verified
  • Differences between inverter and meter data can be explained
  • Missing data, shutdown and communication loss are detectable
  • The self-consumption ratio calculation retains raw data and definitions
  • The platform has no unauthorized grid control function

Limitations and exclusions

  • The solution does not replace grid protection, inverter control or the electricity settlement system
  • The available documentation does not support a compatibility commitment for all inverter protocols
  • With incomplete metering boundaries or meter data, an accurate self-consumption ratio cannot be committed

Operational value

  • Lets generation, consumption and export data be reconciled under one definition
  • Provides a basis for self-consumption analysis and anomaly investigation
  • Reduces data fragmentation between inverters, meters and manual reports

Selection guidance

  • Map the grid gateway, generation-side and load-side metering points first
  • Where harmonics or voltage fluctuation are a concern, select ESE and confirm its specific capability
  • Without an inverter protocol, basic generation data can still be built from confirmed meters

Typical implementation patterns

  • A typical evaluation pattern maps the gateway, generation and load meters of one self-consumption project, then evaluates inverter interfaces and the self-consumption ratio calculation. The pattern contains no specific project, generation figures or settlement data.

Before retrofit → With the solution

Before retrofit

  • Generation, consumption and export metering boundaries are unclear
  • Inverter and gateway meter data differ in time or definition
  • The self-consumption ratio lacks a traceable calculation basis

With the solution

  • Lets generation, consumption and export data be reconciled under one definition
  • Provides a basis for self-consumption analysis and anomaly investigation
  • Reduces data fragmentation between inverters, meters and manual reports

How to evaluate the effect

01

Measurable signal

ESA, ESE and gateway meters cover generation, load and grid boundaries.

02

Data source

ESA Smart Meter (40+ Electrical Parameters) · ESE Power Quality Monitor (Harmonics & THD)

03

Review method

Generation, load, grid and ownership boundaries are clearly mapped

04

Acceptance boundary

The solution does not replace grid protection, inverter control or the electricity settlement system

Frequently asked questions

Is an inverter connection mandatory?

Not necessarily. Basic generation and boundary reconciliation can be done with meters; inverter data can add efficiency, status or fault information.

How is the self-consumption ratio calculated?

Define the generation, export and load boundaries and calculate over a complete period. Missing data and boundary changes must be explained separately.

Can the platform control the inverter?

Control capability should not be assumed. Any control requires the equipment protocol, authorization and a safety review.

Do gateway and internal meters have the same accuracy?

Purpose and accuracy requirements may differ. Select according to metering and settlement requirements and confirm calibration status.

How is night-time shutdown data handled?

Record the reason for shutdown or zero generation and include it in daily data under a consistent definition.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK