Home / Solutions / Compressed Air System Efficiency and Predictive Maintenance

Compressed Air System Efficiency and Predictive Maintenance

Compressed air efficiency analysis should first establish metering boundaries for compressors, air receivers, dryers and consumption areas. ESA acquires electrical parameters, ESE provides power quality data where required, EST monitors confirmed electrical node temperatures, and CW connects third-party pressure, flow and PLC data. Pressure and flow capability is not provided by the existing product range by default, and predictive maintenance must be based on historical baselines, event labels and manual review.

Energy DataEnergy Efficiency Analysis

Solution overview

The solution combines electrical data with compressed air process data. It addresses fragmented data and missing baselines first and does not commit to unverified fault prediction or energy savings.

Applicable industries

  • Manufacturing plants

Primary user roles

  • Plant electrical O&M
  • Equipment engineers
  • Energy managers

Problems addressed

  • The relationship between compressor pressure, flow and energy consumption is not transparent
  • Unloaded, loaded and leakage states are not recorded against energy consumption
  • Maintenance events and energy anomalies have no common timeline

Recommended product combination

System architecture and data flow

Compressed Air System Efficiency and Predictive Maintenance System TopologyFour-layer data flow across perception, edge control, platform and application for Compressed Air System Efficiency and Predictive Maintenance.01Perception layer
ESA, ESE and EST acquire electrical-side data;PLCs or third-party instruments provide pressure and flow.
02Edge / control layer
CW aggregates multi-source data and connects DI/DO or analog signals where required.
03Platform layer
FEXLINK builds equipment, operating-condition, efficiency and maintenance data.
04Application layer
Equipment and energy staff jointly analyze unloaded operation, leakage and maintenance anomalies.

Perception layer

ESA, ESE and EST acquire electrical-side data; PLCs or third-party instruments provide pressure and flow.

Edge / control layer

CW aggregates multi-source data and connects DI/DO or analog signals where required.

Platform layer

FEXLINK builds equipment, operating-condition, efficiency and maintenance data.

Application layer

Equipment and energy staff jointly analyze unloaded operation, leakage and maintenance anomalies.

Data flow

  1. Establish boundaries for compressors, dryers, air receivers and consumption areas
  2. Acquire power, status, pressure, flow and temperature
  3. Unify time and handle downtime and missing data
  4. Establish specific-power and operating-condition baselines
  5. Review anomalies together with maintenance records

Integration and interfaces

  • Pressure, flow and dew point data preferably come from existing instruments or PLCs; protocol and range must be confirmed
  • Compressor controller interfaces and status point lists are checked against equipment documentation
  • Maintenance records can be linked through platform work orders or existing system interfaces

Applicable standards

  • Compressed air system efficiency evaluation and metering standards are confirmed against industry and project
  • Electrical and communication installation requirements follow site practice
  • Data periods for pressure, flow, temperature and power are unified before analysis

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Compressors, metering circuits and process measurement points correspond one-to-one
  • Power, pressure and flow data are comparable in time
  • Unloaded, loaded, shutdown and maintenance events carry labels
  • Baseline data quality and abnormal points are processed
  • Alarms can be traced to raw data and equipment status
  • Predictive results are reviewed manually rather than turned directly into maintenance conclusions

Limitations and exclusions

  • The solution does not provide pressure, flow or dew point sensors by default
  • A compressor fault cannot be judged from a single power or temperature reading
  • Without a baseline period, air volume data and maintenance records, no energy savings or prediction accuracy can be committed

Operational value

  • Places compressor power, pressure, flow and operating status in one view
  • Provides leads for investigating leakage, unloaded operation and low-efficiency operation
  • Establishes before-and-after conditions for maintenance and efficiency measures

Selection guidance

  • Confirm the existing pressure and flow instruments and compressor interfaces first
  • Equip key circuits with ESA or ESE; select EST for electrical node temperature according to risk
  • Without long-term operating-condition labels, build an efficiency baseline first and do not commit to fault prediction

Typical implementation patterns

  • A typical evaluation pattern selects a group of compressors and builds an operating-condition baseline from power, pressure, flow and operating records. The pattern does not represent a completed customer project or a validated predictive maintenance result.

Before retrofit → With the solution

Before retrofit

  • The relationship between compressor pressure, flow and energy consumption is not transparent
  • Unloaded, loaded and leakage states are not recorded against energy consumption
  • Maintenance events and energy anomalies have no common timeline

With the solution

  • Places compressor power, pressure, flow and operating status in one view
  • Provides leads for investigating leakage, unloaded operation and low-efficiency operation
  • Establishes before-and-after conditions for maintenance and efficiency measures

How to evaluate the effect

01

Measurable signal

ESA, ESE and EST acquire electrical-side data;PLCs or third-party instruments provide pr…

02

Data source

ESA Smart Meter (40+ Electrical Parameters) · ESE Power Quality Monitor (Harmonics & THD)

03

Review method

Compressors, metering circuits and process measurement points correspond one-to-one

04

Acceptance boundary

The solution does not provide pressure, flow or dew point sensors by default

Frequently asked questions

Who provides pressure and flow data?

Usually existing instruments, PLCs or third-party systems. Interfaces and ranges must be confirmed; the products should not be assumed to include them.

Is EST used to measure compressed air temperature?

EST is mainly used for confirmed temperature measurement points. Whether it suits a specific medium and mounting position must be confirmed against the probe and model.

Can compressor faults be predicted?

Trend studies are possible with sufficient baselines and labels, but model output must not be used directly as a maintenance conclusion.

How is unloaded-operation waste identified?

Combine operating status, power, pressure and air volume data and analyze them under comparable conditions.

Can power be metered first, on its own?

An electrical baseline can be built, but specific air consumption or leakage analysis also needs pressure, flow or operating data.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK