Direct Answer
A company faces both the dual energy-consumption control and carbon auditing — two systems or one integrated platform? An integrated energy-carbon supervision center uses one set of sub-metering data as its foundation and converts carbon automatically as "energy quantity × emission factor" — energy and carbon share one source, avoiding two ledgers that never reconcile.
A scenario: A group faces an audit at year end — one department calculates the energy report, another the carbon — the calibers disagree — three days of assembly — the difference is still found. The logic of design is that carbon is just energy quantity times a factor — one foundation, two views, reports generated automatically.
1. Why Energy and Carbon Must Share One Source
The source of carbon — fuel combustion: electricity, gas and oil use produce emissions; The formula — carbon = energy quantity × emission factor; The meaning — consistency: if the energy figure is right, the carbon figure can be right; The cost of separation — two ledgers: calibers disagree, audits assembled by hand; The essence — one figure, one origin: one dataset, two views.
In one sentence: carbon = energy quantity × factor — if the energy figure is right, the carbon figure can be right.
An example: A factory uses 1,000,000 kWh — the factor 0.5703 kgCO₂/kWh — carbon about 570 tonnes. The logic is that carbon is not measured independently but calculated from energy quantity — the two must share one source.
The basis of accounting — GB/T 32150 and ISO 14064-1, with monthly updates so energy and carbon stay in step.
2. Why the Old Two-System Road Does Not Work
Old path one, two systems — built separately: one for energy, one for carbon; Old path two, two datasets — repeated collection: the same meter is read twice; Old path three, two calibers — inconsistent algorithms: boundaries and factors not unified; The cost — conflict: figures disagree at audit and rework repeats; The root — duplicate construction: one source split into two ledgers.
In one sentence: the old road is repeated collection, conflicting calibers and hand-assembled audits — dead end.
An example: A group has two systems — energy uses the output caliber, carbon the output-value caliber — they do not reconcile. The logic is that splitting one source into two systems digs your own pit — integration is inevitable.
3. The Integrated Architecture Overview
Layer one, the metering foundation — the data source: sub-metering of electricity, gas, oil and other energy; Layer two, the energy ledger — aggregation: energy aggregated by organization, workshop and line; Layer three, carbon conversion — calculation: energy × factor converts carbon automatically; Layer four, the dual-control dashboard — presentation: dashboards for energy control and carbon audit; The essence — one chain: metering, ledger, carbon, dashboard.
In one sentence: the architecture is metering foundation, energy ledger, carbon conversion and dual-control dashboard — one chain.
The handoff — automatic: upper layers take data with no second entry.
An example: A park architecture: ESA meters 150 circuits — ESX aggregates — the platform produces dual-control and carbon reports. The logic is that four layers each do their job — the upper layers all build on the same data.
4. The Metering Foundation: How to Build Sub-Metering Data
Foundation one, sub-meter coverage — by type: electricity, gas and oil metered separately; Foundation two, layered points — by level: enterprise, workshop, line and equipment; Foundation three, edge collection — direct: the gateway collects automatically; Foundation four, data quality — credible: completeness monitored and anomalies traceable; The meaning — the basis of everything: the ledger, carbon and reports rely on it.
In one sentence: the foundation is sub-meter coverage, layered points, edge collection and credible quality — the basis of everything.
The granularity — by energy type, by workshop area and by key equipment; The way of collection — automatic: gateways collect directly, no manual meter reading.
An example: A factory foundation: three energy types metered separately — points in workshops — ESX collects directly — completeness 99.5%. The logic is that the foundation decides the upper layers — sub-metering, layers, collection and quality are the four things to do well first.
5. The Energy Ledger: How Energy Is Aggregated
Ledger one, by organization — by subject: aggregated for the group, factory and workshop; Ledger two, by time — by period: daily, monthly and annual ledgers; Ledger three, unit consumption — by efficiency: energy per unit of product calculated automatically; Ledger four, benchmarking — by comparison: compared with the same period and peers; The meaning — visible energy, aggregated by organization and period.
In one sentence: the ledger aggregates by organization and period — unit consumption is automatic and benchmarking is always available.
The check — reconciliation: the sum of sub-items is checked against the total.
An example: A factory ledger: monthly energy for three workshops aggregated — energy per unit 0.85 — benchmarked with last month. The logic is that the ledger is the energy book — unit consumption and benchmarking are its value-added outputs.
6. Carbon Conversion: Energy Quantity × Emission Factor
Conversion one, electricity — purchased power: usage × grid emission factor; Conversion two, natural gas — gas use: gas volume × natural gas factor; Conversion three, diesel/gasoline — fuel use: fuel quantity × fuel factor; Conversion four, summation — total: all energy types summed into organizational carbon; The meaning — automatic carbon: when energy changes, carbon updates.
In one sentence: carbon conversion is energy quantity × the corresponding factor for each type — organizational carbon is summed automatically.
Common factors: grid electricity about 0.5703 kgCO₂/kWh and natural gas about 2.1622 kgCO₂/m³ (refer to the latest official releases); The update — timely: the grid factor is published annually and must be updated.
An example: A factory: 1,000,000 kWh × 0.5703 + 10,000 m³ × 2.1622 — total carbon produced automatically. The logic is that conversion is multiplication and addition — with a correct factor library and accurate energy quantity, carbon is automatic.
7. Boundary Definition and the Emission Factor Library
Boundary one, scope 1 — direct emissions: gas burned in owned boilers, fuel burned in owned vehicles; Boundary two, scope 2 — purchased electricity: indirect emissions from purchased power; The meaning — unified caliber: at audit the boundary is clear; The factor library — authoritative: maintained with the latest official factors; The reminder — the grid factor changes yearly and must be updated.
In one sentence: the boundary is scope 1 direct and scope 2 purchased electricity — the factor library follows official maintenance.
The content — scope 1 covers owned boilers, vehicles and generators; scope 2 covers purchased electricity and heat; scope 3 is generally not in the dual-control assessment.
An example: A factory boundary: scope 1 (boiler gas + vehicle fuel) + scope 2 (purchased electricity) — factor library 2024 edition. The logic is that the boundary decides what is counted, the factor how it is counted — the caliber withstands audit.
8. One-Click Generation of Dual-Control and Carbon Audit Reports
Report one, the dual-control table — government caliber: total energy and intensity indicators; Report two, the carbon audit table — enterprise caliber: total emissions and reduction progress; Report three, the monthly brief — management caliber: monthly energy and carbon changes; Report four, audit annexes — data traceability: raw data searchable and provable; The meaning — no assembly: reports generated from data automatically.
In one sentence: one-click reports are the dual-control table, carbon audit table, monthly brief and audit annexes — from data, not assembled.
The fields — total and intensity for both energy and carbon, year-on-year and month-on-month, reduction progress; The cycle — automatic: monthly, quarterly and annual reports on schedule.
An example: A group faces an audit — the dual-control and carbon tables are exported in one click — three days becomes three hours. The logic is that reports are not assembled on the fly — the platform generates them by caliber.
9. The Configuration List for a Typical Enterprise
Configuration one, metering devices — ESA meters plus gas/oil metering; Configuration two, edge gateways — ESX for aggregation and upload; Configuration three, platform modules — energy-carbon supervision center software; Configuration four, factors and boundaries — the factor library and scope configuration; The meaning — itemized, nothing missed.
In one sentence: the configuration list is metering, gateway, platform and factor-boundary — four items, nothing missed.
A sample list:
| Item | Content | Note |
|---|---|---|
| Metering devices | ESA meters, gas/oil metering | sub-metering covers electricity, gas and oil |
| Edge gateways | ESX series | aggregation upload, local cache |
| Platform modules | energy-carbon supervision center | ledger, carbon, dual-control dashboard |
| Factors and boundaries | factor library + scope config | latest official version |
An example: A group list: ESA + ESX + platform for three factories — factor library 2024 edition. The logic is that the list avoids finding missing factors after go-live.
10. The Phased Construction Path
Phase one, the metering foundation — collect data: sub-metering and edge collection go live; Phase two, the ledger and carbon — look at the data: the ledger and carbon conversion go live; Phase three, the dual-control dashboard — present it: the dashboard goes live; Phase four, the optimization loop — use the data: unit-consumption optimization and carbon-reduction actions; The meaning — stable landing: each phase delivers value.
In one sentence: phased construction is collect, look, present and use — value in each phase.
The cycle and acceptance:
| Phase | Cycle | Content | Acceptance |
|---|---|---|---|
| Phase 1 | about 1-2 months | metering foundation live | completeness target met |
| Phase 2 | about 1 month | ledger and carbon conversion | reports available |
| Phase 3 | about 1 month | dual-control dashboard | dashboard matches the site |
| Phase 4 | ongoing | optimization loop | unit consumption down |
An example: A factory: phase 1 is 2 months of collection — phase 2 is 1 month of ledger and carbon — phase 3 dashboard live — phase 4 optimization. The logic is that each phase delivers — first data, then reports, then optimization.
11. Back to YESLON: The Energy-Carbon Autonomy System 4×3×2
What 4×3×2 is — the framework: four layers, three engines and two loops; The capability — integrated energy-carbon: one foundation, dual control and carbon together; The carrier — the smart energy-carbon IoT platform: from metering to the dashboard; The promise — one figure, one origin: energy and carbon share one dataset and two views.
In one sentence: the energy-carbon autonomy system 4×3×2 is metering, ledger, carbon and dual-control in one.
An example: A park uses the platform — 150 circuits metered — reports generated automatically — GB/T 32150 caliber. The logic is that integration is a system landed, not a concept — the caliber follows national standards.
12. Self-Check: Four Questions to See Whether the Design Works
Question one, shared source — do energy and carbon use the same dataset; Question two, clear boundary — are scope 1 and scope 2 defined clearly; Question three, fresh factors — is the library the latest version; Question four, reports available — can they be generated in one click.
In one sentence: the four questions are source, boundary, factors and reports — all answered, the design works.
A self-check example: A group answers the four questions — one source, clear boundary, fresh factors and available reports — the design works. An integrated energy-carbon supervision center uses one set of sub-metering data — carbon converts automatically as energy × factor — the four-layer chain makes energy and carbon share one source — the old two-system road is a dead end.
Scope and Limitations
- The conclusions in this article are intended for LV distribution and electrical-safety sites. Standard numbers (GB/T 32150) refer to their currently effective editions, and product parameters follow the latest FEXLINK selection handbook and product knowledge base.
- Quantitative criteria (protection zone, discharge and residual voltage, earth resistance, thresholds and grading) hold under the preconditions stated in this article. Where the site voltage level, earthing arrangement, environmental category or load profile differs, the figures must be recalculated. Specific configurations involving ESA all-element smart meter, ESX intelligent edge computing gateway should be verified against actual circuit parameters.
- Specific product models and parameters are subject to the latest selection handbook and product knowledge base; this article does not constitute selection or procurement advice.
- Standard numbers cited here refer to the currently effective editions; when a standard is revised, the related quantitative conclusions must be re-checked.
- Deployment and implementation for specific projects must be carried out by qualified engineers based on site survey and design drawings.
Frequently Asked Questions
Facing Both the Dual Energy-Consumption Control and
A company faces both the dual energy-consumption control and carbon auditing — two systems or one integrated platform