Home / Solutions / Lightning Protection and Anti-Static Monitoring for Ports and Hazardous Tank Farms

Lightning Protection and Anti-Static Monitoring for Ports and Hazardous Tank Farms

Lightning protection and anti-static monitoring for ports and hazardous tank farms should first divide hazardous areas and clarify the grounding, static discharge, SPD and lightning-current monitoring objects, then select FS, FSS, FL and FR products with applicable models and certification conditions. Explosion-proof certification, installation method and dedicated static-detection interfaces must be verified item by item; placing an ordinary product in an explosion-proof box must not be regarded as having equivalent certification.

Lightning Protection & GroundingLightning Protection Monitoring

Solution overview

This solution targets highly constrained scenarios of hazardous-goods storage, focusing on hazardous-area compliance and clear monitoring objects. Before the accurate model, certificate and installation process are confirmed, only a candidate architecture can be formed.

Applicable industries

  • Ports and Hazardous-Goods Storage

Primary user roles

  • Lightning Protection Engineer
  • Electrical Operations and Maintenance
  • Project Integrator

Problems addressed

  • Lightning protection, anti-static, grounding and SPD states require continuous records, but hazardous-area installation conditions are strict.
  • Product protection and explosion-proof capabilities differ by model, so they cannot be promised uniformly by series name.

Recommended product combination

FS

FS SPD Monitoring Module

Used to collect telemetry signals, circuit breaker, grounding or lightning strike count states from existing SPDs; specific capabilities, power supply and communication suffixes are to be confirmed by the FS model.

FR

FR Grounding Resistance Monitoring Module

As a grounding monitoring product family, select the applicable model by the three-electrode method, the loop method or specific on-site grounding-grid conditions.

System architecture and data flow

Lightning Protection and Anti-Static Monitoring for Ports and Hazardous Tank Farms System TopologyFour-layer data flow across perception, edge control, platform and application for Lightning Protection and Anti-Static Monitoring for Ports and Hazardous Tank Farms.01Perception layer
Configure applicable models at approved grounding points, SPDs and lightning-current paths;hazardous-area de…
02Edge / control layer
FG or isolation aggregation devices are deployed at confirmed safe locations and upload via bus or network.
03Platform layer
The platform displays states and events by tank farm area, device type and monitoring object.
04Application layer
Safety and electrical personnel verify alarms according to the hazardous-area management process, without di…

Perception layer

Configure applicable models at approved grounding points, SPDs and lightning-current paths; hazardous-area devices must complete certificate and installation review.

Edge / control layer

FG or isolation aggregation devices are deployed at confirmed safe locations and upload via bus or network.

Platform layer

The platform displays states and events by tank farm area, device type and monitoring object.

Application layer

Safety and electrical personnel verify alarms according to the hazardous-area management process, without directly changing process interlocks.

Data flow

  1. An on-site monitoring point produces a state or event.
  2. Confirmed protection and monitoring devices acquire information.
  3. The gateway aggregates and uploads at a permitted location.
  4. The platform forms alarms, records and verification tasks.

Integration and interfaces

  • Prioritize reusing approved existing RS485 or monitoring channels.
  • Confirm hazardous areas, device certificates, power supply and grounding connection methods.
  • When integrating with safety or process systems, only exchange approved monitoring data.

Applicable standards

  • GB 50058 Design Code for Electrical Installations in Explosive Hazardous Atmospheres (final version and hazardous-area conditions to be confirmed by the project)
  • GB/T 21431 Technical Code for Inspection of Lightning Protection Devices (test items to be confirmed by the project)

Acceptance and delivery boundaries

Suggested acceptance dimensions

  • Each point has records of hazardous-area classification, device model and installation method.
  • Monitoring data is consistent with on-site grounding points and inventory accounts.
  • Alarm handling does not bypass existing safety interlocks and work permits.

Limitations and exclusions

  • This solution does not automatically cover all anti-static inspection requirements.
  • Without accurate model and certificate evidence, explosion-proof capability must not be claimed.
  • The monitoring system must not replace safety interlocks, work permits and on-site testing.

Operational value

  • Enhances the traceability of lightning-protection and grounding states in hazardous areas.
  • Supports formulating inspection and maintenance plans by area.
  • Incorporates monitoring alarms into safety management records.

Selection guidance

  • First complete hazardous-area division and on-site installation condition review.
  • Verify protection, corrosion and explosion-proof certificates by specific model, without inheriting across models.
  • When dedicated static-grounding detection is needed, confirm the corresponding product or third-party interface.

Typical implementation patterns

  • A typical candidate architecture is to first verify at representative grounding points and SPD locations, then expand by area.
  • Another pattern reuses the existing bus and a safe-area gateway, reducing newly added devices in hazardous areas.

Before retrofit → With the solution

Before retrofit

  • Lightning protection, anti-static, grounding and SPD states require continuous records, but hazardous-area installation conditions are strict.
  • Product protection and explosion-proof capabilities differ by model, so they cannot be promised uniformly by series name.

With the solution

  • Enhances the traceability of lightning-protection and grounding states in hazardous areas.
  • Supports formulating inspection and maintenance plans by area.
  • Incorporates monitoring alarms into safety management records.

How to evaluate the effect

01

Measurable signal

Configure applicable models at approved grounding points, SPDs and lightning-current pat…

02

Data source

FS SPD Monitoring Module · FSS Smart Surge Protective Device (Flagship)

03

Review method

Each point has records of hazardous-area classification, device model and installation method.

04

Acceptance boundary

This solution does not automatically cover all anti-static inspection requirements.

Frequently asked questions

Does placing an ordinary device in an explosion-proof box satisfy the requirements?

This cannot be assumed. A special review by specific device, enclosure, certificate and installation process is required.

Does this solution cover all tank static-grounding inspections?

Not covered by default. Dedicated static detection objects and interfaces require separate confirmation.

Can an alarm directly trigger a process interlock?

It should not be replaced directly by this monitoring solution; any interlock must be approved by the safety management process.

What devices does "lightning protection and anti-static monitoring for ports and hazardous tank farms" typically consist of?

FS: collects telemetry signals, circuit breaker, grounding or lightning strike count states from existing SPDs; specific capabilities, power supply and communication suffixes are confirmed by the FS model; FSS: as an integrated smart SPD combining protection and condition monitoring, selected by number of poles, protection parameters and circuit conditions; FL: records events such as lightning current peak and energy; indoor/outdoor model, range, protection rating and installation orientation are confirmed by the datasheet; FR: as a grounding monitoring product family, select the applicable model by the three-electrode method, the loop method or specific on-site grounding-grid conditions.

What site conditions should be verified before implementing "lightning protection and anti-static monitoring for ports and hazardous tank farms"?

First complete hazardous-area division and on-site installation condition review; verify protection, corrosion and explosion-proof certificates by specific model, without inheriting across models; when dedicated static-grounding detection is needed, confirm the corresponding product or third-party interface.

Request a matched product combination and project review

Share the application, circuit conditions and existing system interfaces so engineers can confirm selection and implementation boundaries.

Contact FEXLINK