Direct Answer
How is the "tonne of standard coal" converted in a report? The comprehensive energy consumption converts the electricity, the natural gas and the oil into the unified tonne of standard coal (tce) by their own "standard-coal conversion coefficients" per GB/T 2589 and then sums them — the electricity coefficient has the equivalent-value and the equal-value bases, and the report must state which one is used — the root of the unreadable tce number is the failure to distinguish the equivalent value from the equal value — with the base stated, the number is readable.
A scenario: A report writes "the comprehensive energy consumption is 3,200 tce" — how the electricity, the gas and the oil are summed and where the coefficients come from — the compiler is uncertain and the reviewer cannot verify. The logic is that the essence of the tce is "converting different energies into one unit" — 1 kWh of electricity, 1 m³ of gas and 1 L of oil cannot be added directly — converting them into tce by their own coefficients makes the sum possible — the base of the coefficient (equivalent/equal) determines the sum.
1. Why Convert into the Standard Coal
The meaning of the unified unit — the electricity (kWh), the gas (m³) and the oil (L) have different units and cannot be added directly; The definition of the standard coal — 1 kg of the standard coal with a lower heating value of 29,307 kJ (7,000 kcal); The purpose of the conversion — converting all the energies into the same unit (tce): comparable in total and feasible in sum; The application of the conversion — the comprehensive consumption, the unit consumption and the energy performance indicators are all based on the tce.
In one sentence: converting into the standard coal changes "chickens and ducks" into "one measure" — different units, the tce is the common ruler.
An example: In a month, a company consumes 3,000,000 kWh of electricity, 30,000 m³ of gas and 5 tonnes of diesel — the three numbers cannot be summed — after the conversion: the electricity about 369 tce, the gas about 39.9 tce and the oil about 7.3 tce — the total about 416 tce — this is the comprehensive consumption. The logic is that the tce makes the "sum" possible — convert first, then add — without the tce, the comprehensive consumption cannot be calculated.
2. The Conversion Coefficients of the Energy Types
The meaning of the coefficient — how many kg of the standard coal one metering unit of an energy equals; The coefficients of the common energies — the electricity (equivalent value 0.1229 kgce/kWh), the natural gas (about 1.33 kgce/m³) and the diesel (about 1.4571 kgce/kg); The source of the coefficients — the appendix and the provisions of GB/T 2589 (the general rules of the comprehensive energy consumption calculation); The update of the coefficients — take the values of the latest standard version and note the version year in the reference.
In one sentence: the coefficient = the "standard-coal equivalent" of each metering unit — the electricity, the gas and the oil have their own, sourced from GB/T 2589 — state the version taken in the report.
The table of the common conversion coefficients:
| Energy | Unit | Coefficient (kgce) | Note |
|---|---|---|---|
| Electricity (equivalent) | kWh | 0.1229 | By the thermal equivalent |
| Natural gas | m³ | About 1.33 | By the lower heating value |
| Diesel | kg | About 1.4571 | By the lower heating value |
| Raw coal | kg | About 0.7143 | By the standard coal |
An example: A report notes "the electricity by the equivalent value 0.1229 kgce/kWh" — 3,000,000 kWh × 0.1229 = 368.7 tce — the reviewer can reproduce by the same coefficient — with the coefficient stated, the number is verifiable. The logic is that the traceability of the coefficient determines the credibility of the report — the source, the version and the value all stated — the reviewer reproduces and matches.
3. The Equivalent Value and the Equal Value of the Electricity
The equivalent value — by the thermal equivalent of the electricity: 1 kWh = 3,600 kJ → 0.1229 kgce/kWh; The equal value — by the coal consumption of the power generation: considering the generation/transmission losses → about 0.30 kgce/kWh (by the statistical consumption); The difference of the two bases — the equivalent value is small (only the heat of the electricity itself) and the equal value is large (the whole generation process) — the result can differ more than twice; The note of the report — GB/T 2589 clearly "converts the electricity by the equivalent value": the report must state which base is used.
In one sentence: the electricity has two bases — the equivalent value looks at "the electricity itself" and the equal value looks at "the generation process" — GB/T 2589 adopts the equivalent value — with the base stated, the result has no ambiguity.
The table of the equivalent value and the equal value:
| Base | Value (kgce/kWh) | Meaning | Application |
|---|---|---|---|
| Equivalent | 0.1229 | The thermal equivalent | Comprehensive (GB/T 2589) |
| Equal | About 0.30 | The generation coal consumption | Energy balance/statistics |
An example: With 3,000,000 kWh: the equivalent value gives 368.7 tce and the equal value gives 900 tce — the same electricity, and the base difference is 531 tce — without the base stated, the reviewer cannot reproduce by either. The logic is that the base difference is a "quality" not a "quantity" — the equivalent and the equal differ several times — with "by the equivalent value" stated, the reproduction has a benchmark.
4. The Sum Method of the Comprehensive Consumption
The steps of the sum — first: collect the physical consumption of each energy; second: look up the coefficient of each; third: convert into the tce item by item; fourth: sum into the comprehensive consumption; The notes of the sum — the energy types complete (electricity/gas/oil/coal/steam etc.); the coefficient bases unified (all equivalent or all equal); the duplicate calculation avoided (the input and the output of the conversion process not summed twice); The boundary of the comprehensive consumption — per GB/T 2589: the sum of the various energies actually consumed in the production, converted into the standard coal.
In one sentence: four steps of the sum — collect, look up, convert item by item and sum — complete types, unified bases and no duplicate — the comprehensive consumption is accurate.
An example: A company sums: 3,000,000 kWh × 0.1229 = 368.7 tce; 30,000 m³ × 1.33 = 39.9 tce; 5 tonnes × 1.4571 = 7.3 tce — the total 415.9 tce — this is the comprehensive consumption. The logic is that the sum looks simple but the trap is in the base — the unified coefficient, the complete types and no duplicate — the three achieved, the result survives the reproduction.
5. The Disclosure Requirements of the Report
The contents of the disclosure — the coefficient values and the sources (the GB/T 2589 version); the choice of the equivalent/equal value of the electricity; the physical quantities and the converted results of each energy; The position of the disclosure — the appendix or the calculation note of the report: convenient for the reviewer; The meaning of the disclosure — a transparent base and a reproducible number: the comprehensive consumption is credible; The common omissions of the disclosure — only the total tce without the sub-items, without the coefficient sources and without the electricity base — the three omissions are always asked by the reviewer.
In one sentence: the three elements of the disclosure — the coefficient sources, the electricity base and the sub-item details — with the disclosure in place, the comprehensive consumption is checkable and calculable.
An example: The appendix of a report: "the electricity by the equivalent value 0.1229 kgce/kWh per GB/T 2589, the natural gas by the lower heating value, and the sub-item details in the attached table" — the reviewer reproduces consistently — passed at once. The logic is that the disclosure is not a form but "the reproducibility" — with the base stated, the reviewer matches — the credibility of the report comes from the completeness of the disclosure.
Back to the digital electrical intelligent supervision system — the digital calculation of the comprehensive consumption: the platform embeds the GB/T 2589 coefficient library, converts the electricity, the gas and the oil into the tce by the coefficients automatically, generates the sub-items and the total automatically and writes the base and the coefficient sources into the appendix automatically — the coefficient automatic, the base automatic and the disclosure automatic — the comprehensive consumption starts with the correct calculation of the platform.**
Scope and Limitations
- The conclusions in this article are intended for LV distribution and electrical-safety sites. Standard numbers (GB/T 2589) refer to their currently effective editions, and product parameters follow the latest FEXLINK selection handbook and product knowledge base.
- Quantitative criteria (protection zone, discharge and residual voltage, earth resistance, thresholds and grading) hold under the preconditions stated in this article. Where the site voltage level, earthing arrangement, environmental category or load profile differs, the figures must be recalculated.
- Specific product models and parameters are subject to the latest selection handbook and product knowledge base; this article does not constitute selection or procurement advice.
- Standard numbers cited here refer to the currently effective editions; when a standard is revised, the related quantitative conclusions must be re-checked.
- Deployment and implementation for specific projects must be carried out by qualified engineers based on site survey and design drawings.
Frequently Asked Questions
How Is "Tons of Standard Coal" Converted
The comprehensive energy consumption converts the electricity