Direct Answer
All the measurement points are there and all the thresholds are set — why do you still only find out after the equipment burns? Qianzhi performs 7-dimensional sensing on every parameter — D1 amplitude, D2 rate of change, D3 trend drift (the core), D4 anomaly density, D5 fluctuation magnitude, D6 correlation verification and D7 time-series risk score; early hidden risks often have an amplitude that has not exceeded the limit, but a trend that is already drifting (D3), and looking only at D1 misses them. The traditional binary threshold only looks at "exceeded or not" — it alarms only when exceeded — while the feature of an early hidden risk is "not yet exceeded, but always drifting" — the 7-dimensional sensing is exactly about catching this "drift".
A scene: a motor's bearing temperature rose slowly from 58℃ to 66℃ over 5 days — the amplitude did not exceed the threshold — but the D3 trend drift already alarmed — the shutdown inspection found bearing wear — looking only at the amplitude would have missed it.
1. Why Looking Only at the Amplitude Misses Early Hidden Risks
The logic of the amplitude threshold — alarm when exceeded: simple and direct — a binary judgment; The blind spot of the amplitude threshold — no alarm when not exceeded: early hidden risks have an amplitude that has not exceeded — exactly missed; The feature of an early hidden risk — the trend is drifting: slow rise, slow fall and drift — the amplitude does not move but the trend moves; The consequence of the missed alarm — found only after it burns: the amplitude exceeded and the fault arrived — late; The limitation of looking only at the amplitude — only the result is seen: exceeding is the result and drift is the process — the process is earlier than the result.
In one sentence: looking only at the amplitude misses early hidden risks = the amplitude only sees the result and the drift is the process — early hidden risks have an amplitude not exceeded but a trend drifting — when the value exceeds, the fault has also arrived.
A missed-alarm example — a motor's temperature rose slowly for 5 days — no alarm because the amplitude was not exceeded — on day 6 it exceeded — already burned. The amplitude is the result and the drift is the process — only looking at the result is necessarily late — catching the process is early.
2. What the 7-Dimensional Sensing Is
The meaning of the 7 dimensions — D1-D7, seven dimensions: amplitude, rate of change, trend, density, fluctuation, correlation and score — multi-angle sensing; The composition of the 7 dimensions — D1 amplitude, D2 rate of change, D3 trend drift, D4 anomaly density, D5 fluctuation magnitude, D6 correlation verification and D7 time-series risk score — checked dimension by dimension; The relationship of the 7 dimensions — D1-D6 are the dimensions and D7 is the synthesis: six dimensions evaluate and one total score outputs — comprehensive analysis; The meaning of the 7 dimensions — not only the amplitude: trends, fluctuations and correlations all checked — early hidden risks cannot escape; The essence of the 7 dimensions — from "exceeded or not" to "normal or not": not just alarming but judging — sensing upgraded.
In one sentence: the 7-dimensional sensing = D1 amplitude + D2 rate of change + D3 trend drift + D4 anomaly density + D5 fluctuation magnitude + D6 correlation verification → synthesizing into the D7 risk score — multi-angle sensing, early hidden risks cannot escape.
A 7-dimension example — a parameter had a normal amplitude — but the D3 trend drifted and D6 correlated abnormally — the D7 score rose — early warning. The 7 dimensions are an upgrade of sensing — from "exceeded or not" to "normal or not" — looked at from multiple angles, hidden risks cannot hide.
3. D1 Amplitude and D2 Rate of Change
D1 amplitude — the magnitude of the value: the level of voltage, current and temperature — the most basic dimension; The limitation of D1 — only the magnitude: no alarm if not exceeded — looking only at D1 misses; D2 rate of change — how fast it changes: how much per second it rises and falls — looking at the speed; The value of D2 — fast change is a signal: instantaneous impact and sudden change — the rate of change catches sudden events; The meaning of D1+D2 — the basic two dimensions: magnitude + speed — one more layer than looking only at the amplitude.
In one sentence: D1 amplitude (the magnitude) + D2 rate of change (how fast) — magnitude + speed — one more layer than looking only at the amplitude.
A D1D2 example — a voltage had a normal amplitude — but the rate of change suddenly increased — D2 caught the impact event. The amplitude looks at the magnitude and the rate of change looks at the speed — the two dimensions cooperate, and sudden changes are not missed.
4. D3 Trend Drift: The Main Force of Early Hidden Risks
The meaning of D3 — trend drift: the value keeps moving in one direction — slow rise, slow fall and drift; The typical form of D3 — slow rise: temperature from 58℃ to 66℃ over 5 days — the amplitude not exceeded but the trend moving; The core position of D3 — the main force of early hidden risks: most faults drift first and exceed later — D3 is the lead time; The mechanism of D3 — statistical testing: continuous drift and significance judgment — not occasional fluctuation; The value of D3 — catching "not yet exceeded but always getting worse": warning before the amplitude exceeds — one step earlier.
In one sentence: D3 trend drift is the main force of early hidden risks — the amplitude not exceeded but the trend drifting — statistical testing catches the drift — warning before the value exceeds.
A D3 example — a joint's temperature rose slowly for 72 hours — the amplitude not exceeded but D3 alarmed — the inspection found the joint loose. D3 is the core of the 7 dimensions — most faults drift first and exceed later — catch the drift, and the lead time is caught.
5. D4 Anomaly Density and D5 Fluctuation Magnitude
D4 anomaly density — how often anomalies occur: the number of anomalies over a period — high density means continuous anomalies; The value of D4 — frequent small anomalies: each one not exceeding but occurring many times — the density exposes the pattern; D5 fluctuation magnitude — how much it fluctuates: the swing range of the value — large fluctuation means instability; The value of D5 — instability is a signal: the fluctuation growing abnormally — the equipment state is changing; The meaning of D4+D5 — frequency + magnitude: the frequency and size of the anomaly — two angles to fill the gaps.
In one sentence: D4 anomaly density (the anomaly frequency) + D5 fluctuation magnitude (the fluctuation size) — frequency + magnitude — neither frequency nor instability is missed.
A D4D5 example — a feeder had frequent anomalies and growing fluctuation — each one not exceeding — D4+D5 caught the instability. The density looks at the frequency and the fluctuation looks at the magnitude — two angles, and anomaly patterns cannot hide.
6. D6 Correlation Verification
The meaning of D6 — correlation verification: the relationship with other parameters — current and temperature, load curves — cross-validation; The mechanism of D6 — correlation analysis: whether the correlation between parameters is abnormal — normally correlated and abnormally divergent; The value of D6 — eliminating interference: a single-parameter anomaly may be interference — correlation verification distinguishes true from false; The value of D6 — finding correlation anomalies: a sudden change in correlation — a signal of a systemic problem; The meaning of D6 — looking at problems with multiple parameters: not only a single point — correlation is one more layer of sensing.
In one sentence: D6 correlation verification = cross-validation with other parameters — correlation divergence distinguishes true from false — not only a single point but the relationships.
A D6 example — a temperature rose but the load did not change — the correlation diverged — D6 found a sensor or load anomaly. A single-point anomaly may be interference — correlation verification distinguishes true from false — the relationships between parameters hide systemic signals.
7. D7 Time-Series Risk Score: The Synthesis of the 7 Dimensions
The meaning of D7 — the comprehensive risk score: 0-100 — synthesizing the 7 dimensions into one score; The synthesis of D7 — six-dimension weighting: D1-D6 each with its own weight — synthesized into D7; The output of D7 — the risk level: the higher the score, the greater the risk — quantifiable and comparable; The meaning of D7 — one score to look at the risk: no need to look at 7 dimensions — intuitive decisions; The boundary of D7 — the score is the result: the dimensions still need to be looked at — D7 locates and D1-D6 find the cause.
In one sentence: D7 = the six dimensions weighted and synthesized into a 0-100 comprehensive risk score — one score to look at the risk — D7 locates the risk and D1-D6 find the root cause.
A D7 example — a device had a high D3 and an abnormal D6 — the D7 score reached 82 — a high-risk warning. D7 is the comprehensive criterion — six dimensions synthesized into one score — look at the score to locate the risk and the dimensions to find the root cause.
8. The Missed-Alarm Comparison with Binary Threshold Alarms
The logic of the binary threshold — exceeded = alarm and not exceeded = no alarm: only two states — simple; The missed alarm of the binary threshold — not exceeding in the early stage: no alarm during the trend-drift stage — the process missed; The logic of the 7 dimensions — continuous sensing: amplitude, trend, fluctuation and correlation — multi-state judgment; The capture of the 7 dimensions — early drift: alarm even if the amplitude is not exceeded — catching the process; The conclusion of the comparison — the binary looks at the result and the 7 dimensions look at the process: the process warning is earlier than the result — the missed-alarm rate drops greatly.
In one sentence: the binary threshold looks at the result (alarm only when exceeded) + the 7-dimensional sensing looks at the process (alarm when drifting) — the process warning is earlier than the result — early hidden risks are not missed.
A comparison example — the same motor: the binary threshold alarmed on day 6 — the 7-dimensional D3 alarmed on day 3 — 3 days earlier. The binary looks at the result and the 7 dimensions look at the process — for the same fault, the 7 dimensions are 3 days earlier — the lead time is the value.
9. Back to FEXLINK: How to Use the Qianzhi 7-Dimensional Sensing
FEXLINK's Qianzhi Engine V4.1: 7-dimensional sensing on every parameter — D1 amplitude, D2 rate of change, D3 trend drift, D4 anomaly density, D5 fluctuation magnitude, D6 correlation verification and D7 risk score — warning when the trend drifts, not waiting for the amplitude to exceed. The 7-dimension checklist: ① D1 amplitude — the magnitude: alarm when exceeding the threshold, the basic defense line → ② D2 rate of change — how fast: sudden impacts caught → ③ D3 trend drift — warning on continuous drift: the main force of early hidden risks → ④ D4 anomaly density — the anomaly frequency: frequent small anomalies expose the pattern → ⑤ D5 fluctuation magnitude — the fluctuation size: instability is the signal → ⑥ D6 correlation verification — cross-validation of parameters: correlation divergence distinguishes true from false → ⑦ D7 risk score — six dimensions synthesized into 0-100: one score to look at the risk — 7-dimensional sensing, early hidden risks not missed.
One summary: the 7-dimensional sensing = D1 amplitude + D2 rate of change + D3 trend drift + D4 anomaly density + D5 fluctuation magnitude + D6 correlation verification → synthesizing into the D7 risk score — early hidden risks often have an amplitude not exceeded but a trend drifting — looking only at D1 misses them. The binary threshold looks at the result and the 7-dimensional sensing looks at the process — the process warning is earlier than the result — 7-dimensional sensing, early hidden risks not missed.
One reminder: when you see "the amplitude has not exceeded", do not rush to feel relieved — ask the 7 dimensions first: is the trend drifting? Is the rate of change normal? Is the anomaly density high? Has the correlation diverged? — after the 7 questions, "normal" can be said. The amplitude is only D1 — trends, density, fluctuation and correlation are all being watched — 7-dimensional sensing, hidden risks cannot hide.
Scope and Limitations
- The conclusions in this article are intended for LV distribution and electrical-safety sites. Criteria are compiled from public codes and FEXLINK product documentation, and product parameters follow the latest selection handbook and product knowledge base.
- Quantitative criteria (protection zone, discharge and residual voltage, earth resistance, thresholds and grading) hold under the preconditions stated in this article. Where the site voltage level, earthing arrangement, environmental category or load profile differs, the figures must be recalculated. Specific configurations involving Qianzhi engine V4.1 should be verified against actual circuit parameters.
- Specific product models and parameters are subject to the latest selection handbook and product knowledge base; this article does not constitute selection or procurement advice.
- Standard numbers cited here refer to the currently effective editions; when a standard is revised, the related quantitative conclusions must be re-checked.
- Deployment and implementation for specific projects must be carried out by qualified engineers based on site survey and design drawings.
Frequently Asked Questions
Qianzhi's Seven-Dimension Sensing
All the measurement points are there and all the thresholds are set — why do you still only find out after the equipment burns