Direct Answer

Owners and engineering contractors often share a misconception: install smart meters in the distribution room, feed the data to a big screen, and that is "digital energy." The answer is: remote meter reading is only the first step of digital energy, not digital energy itself. The essence of digital energy is to continuously convert electrical signals into computable data and produce decisions in a closed loop across the "device — edge — cloud" three layers. Only when four judgement criteria are met at the same time — object modelling, data quality, analysis closed loop, and value delivery — is it truly digital energy. If any one is missing, that big screen is nothing but a "data vase."

A scene: a park spent hundreds of thousands on "energy digitalisation" — more than a hundred smart meters were installed in the distribution room, and a 55-inch screen was hung in the control room showing the current, voltage and power of every feeder in real time. Half a year later, the operations team still relied on manual patrols: alarms on the screen only "flashed red," and no one could say which device it was, what the cause was, or how to handle it. When the electricity bill came, the saving effect was no different from before the meters. The person in charge was confused: "The data is all there, why does it still feel useless?" The answer lies in the four criteria: this system only has "collection." It has no object model (measurement points are not bound to devices and topology), no data quality (alarm thresholds were set arbitrarily), no analysis closed loop (it reports numbers but does not diagnose), and naturally no value delivery (there is not a single quantifiable benefit). Installing meters and a screen only gives you the raw material; the data has not yet been produced.

1. First Clarify: Where Exactly Is Digital Energy "Digital"

To judge whether what you have installed counts as digital energy, go back to the essence. The electrical system generates signals all the time — voltage, current, power, temperature, partial discharge, harmonics, energy consumption. These are all electrical signals. What digital energy does is turn these signals into computable, traceable, decision-ready data, and let the data form a closed loop across the device layer (sensing terminals), the edge layer (edge gateways) and the cloud layer (platforms): collect to cloud → analyse and diagnose → decide and execute → feedback on results.

The most common trap on this chain is treating "collection" as the whole story. Smart meters, gateways and big screens solve the question "can the data come up and be seen"; what digital energy really solves is "once the data is up, can it become a judgement, can it become an action." The former is infrastructure; the latter is digital energy itself.

So the criterion is not how many meters you installed or how big the screen is, but how long a road the data walks inside your system. If it walks the full chain of "signal → data → intelligence → value," that is digital energy. If it only walks "signal → screen," that is a remote meter-reading system — at most the "foundation" of digital energy.

2. Criterion 1: Is There an Object Model

Statement: every measurement point is bound to a definite physical object and topology — which device, which circuit, what parameter, and how it relates to others. Not a pile of isolated "point numbers plus values."

The object model is the foundation of foundations for digital energy. Without it, what you see is a bare number like "current 125 A, temperature 68 °C"; with it, you see "phase-A current of transformer No. 3 on the low-voltage side is 125 A, at an 85% load rate, corresponding to a busbar joint temperature of 68 °C." The two numbers are the same, but the former cannot answer "is this normal, what does the abnormality mean," while the latter can.

What happens without the object model: when an alarm comes, you do not know which device it is; when you want to aggregate energy by circuit, floor or process segment, there is no way; when a device is replaced, the data still hangs on the old name. Many "digital energy" projects die at the very first step because modelling was skipped — the data exists, but the data does not "know" the devices.

Self-check question: open any measurement point at random — can you name its parent device, its circuit, its location and its related parameters? If you cannot, there is no object model.

3. Criterion 2: Does the Data Quality Pass

Statement: the data has been calibrated, gap-filled and anomaly-cleaned, and the thresholds have been tuned — not "dirty data straight to the screen."

Electrical data travels from the sensor to the screen through several hurdles: metering accuracy, communication packet loss, wiring errors, and environmental interference. In a system without quality management, the numbers jumping on the screen may be mixed with: current values whose zero-drift was never calibrated, fake zeros after a gap, "ambient temperature" measured with the cabinet door open, and negative power from reversed wiring. Judging with dirty data is more dangerous than having no data — it produces false "normal" or false "alarms."

Data quality also includes threshold tuning. Many systems go live with default or casually filled alarm thresholds, which leads to two typical failures: the threshold is too loose, alarms ring every day and the site simply ignores them; the threshold is too tight, real faults do not report and the system is a dead letter. A truly credible digital energy system tunes thresholds point by point against equipment ratings, historical statistics and operating conditions, and corrects them dynamically as seasons and loads change.

Self-check question: of the values on the screen, how many would you dare take to sign off, to settle accounts, to make a judgement? If you hesitate, data quality has not passed.

4. Criterion 3: Is There an Analysis Closed Loop

Statement: the system can walk the full path of "see it → understand it → judge it accurately → act on it" — not just report numbers, but give a diagnosis, a location and a handling suggestion, and close the loop.

This is the most essential dividing line between "remote meter reading" and "digital energy." The closed loop of remote meter reading is "data → screen," and the person judges after seeing the numbers; the closed loop of digital energy is "data → analysis → diagnosis → decision → action → feedback": when the current trend is abnormal, the system automatically correlates temperature, load and topology, locates "the busbar joint contact resistance is too high," suggests "re-test within a time limit, take outage treatment if necessary," and tracks the result of the handling.

The four levels of the analysis closed loop:

  • See it: data on the screen in real time (this is where most "digital energy" stops);
  • Understand it: the anomaly is identified and its type is known (overload, overheating, degradation, harmonics);
  • Judge accurately: locate the specific device, give the severity and the handling priority;
  • Act on it: can trigger alarms, work orders, operation suggestions, or even automatic execution (such as trip protection and load regulation).

What happens without the analysis closed loop: the system only "flashes red," and the duty officer is trained to "call an electrician when the red light appears." Why it flashes, where the problem is, and how to handle it all depend on human guessing. At this point, "digital energy" has only moved from "manual patrol" to "manual screen-watching," with no essential gain in efficiency.

Self-check question: when was the last "diagnosis conclusion" the system gave, which device was it about, and was it verified later? If the answer is a blank, the analysis closed loop has not formed.

5. Criterion 4: Has Value Been Delivered

Statement: the system produces quantifiable benefits — energy saving, avoided accidents, reduced outages, improved efficiency — and there is data to prove it.

Digital energy is not an "image project"; in the end it must land on the ledger. Measuring value delivery means looking at at least four kinds of benefit:

  • Energy saving: has power-factor, demand management and energy-efficiency analysis brought the electricity bill down;
  • Avoided accidents: has hidden-hazard warning ever stopped an overload, a heating or a partial-discharge accident;
  • Reduced outages: has predictive maintenance made unplanned outages fewer and shorter;
  • Improved efficiency: have patrol work orders and duty manpower actually decreased.

What happens without value delivery: the system goes live with a big fanfare, and a year later the bill is the same, the faults still appear, and the people are still busy — the person in charge cannot write down a single number in the annual summary. Such "digital energy" will sooner or later be shut down and forgotten.

Self-check question: in this year, how much money did this system save you, what losses did it avoid, and how much manpower did it save? If you can write down concrete numbers, value has been delivered.

6. The Landing Path of True Digital Energy: the Device—Edge—Cloud Closed Loop

The criteria are the "ruler"; the landing path is "how to walk." True digital energy does its own work on each of the three layers and connects them into a closed loop:

  • Device layer (sensing): smart meters, monitoring terminals and sensors continuously collect electrical signals — voltage, current, power, temperature, partial discharge, harmonics, energy consumption. This is the "raw material" of digital energy;
  • Edge layer: edge gateways perform local data cleaning, protocol conversion and local judgement — gap-filling, threshold tuning, local alarms. Dirty data does not go to the cloud, and not every judgement depends on the cloud;
  • Cloud layer (platform): the platform does object modelling, data analysis, diagnosis decisions and report display — device ledger and topology, trend and causal analysis, alarm-diagnosis linkage, energy-efficiency and carbon-efficiency reports. This is where "data is produced."

All three layers are indispensable: with only the device layer, you have "naked data"; with only the device and edge layers, you have "local meter reading"; with device, edge and cloud but no modelling and analysis, you have "watching data on a big screen"; device-edge-cloud plus modelling, plus quality, plus closed loop, plus value — that is digital energy.

7. A "Health Check-up" Analogy: Taking Temperature Is Not Seeing a Doctor

Think of digital energy as a complete health check-up: the smart meters and the big screen are the "thermometer and the lab report" — they measure the body signals and display them, which is collection. But taking the temperature is not seeing a doctor. A truly valuable check-up also has to: compare each indicator against the reference range to judge whether it is normal (data quality and object model), have a doctor integrate the indicators to locate the cause (analysis and diagnosis), give a treatment plan and a follow-up schedule (decision and closed loop), and re-test after a period to see whether the indicators improved (value delivery).

Installing only meters and a screen is like buying a thermometer and a lab report and putting them at home — the body signals are there every day, but there is no "doctor" (analysis), no "diagnosis" (model), no "treatment" (closed loop), and no "follow-up" (value). Taking the temperature is not seeing a doctor, and remote meter reading is not digital energy.

8. The Digital-Energy Iron Rule

Build the object model first, then guarantee data quality, then make the analysis closed loop, and finally deliver monetary value — a dashboard without a closed loop is only a data vase.

The four things have a strict order: without modelling, quality cannot be discussed (data cannot hang on objects); without quality, analysis is all noise (dirty data leads to wrong conclusions); without the analysis closed loop, value cannot be delivered (no one understands it and no one acts on it). Conversely, when all four are done, digital energy is not a "concept" but a "second operations team" that every day saves you electricity, avoids hazards and reduces outages.

The four criteria can be condensed into a four-question self-check:

  • Open a measurement point — do you know its device? (object modelling)
  • The values on the screen — would you dare sign off on them? (data quality)
  • The last diagnosis the system gave — was it verified? (analysis closed loop)
  • How much did this year save — can you produce the numbers? (value delivery)

If all four pass, you have true digital energy; if any answer is a blank, you are still at "remote meter reading."

9. Back to FEXLINK: How a Digital-Energy Platform Makes These Four Things Solid

To land this standard on a product, FEXLINK's enterprise energy-carbon integrated management platform is organised exactly along the "device—edge—cloud" closed loop to make these four things solid: the sensing layer uses smart meters and monitoring terminals to collect the electrical signals completely; the edge layer uses edge gateways for data cleaning, protocol conversion and local judgement to guarantee data quality; the platform layer first builds the object model (device ledger, circuit topology, parameter association), then does trend analysis, causal diagnosis and alarm linkage to push "seeing" forward to "understanding, judging accurately and acting"; and finally uses energy-efficiency reports, carbon-efficiency reports and hidden-hazard handling records to turn value into visible numbers.

Next time someone asks "is what you installed digital energy," do not rush to answer "yes" — run it through the four criteria first: is there an object model? does data quality pass? has the analysis closed loop been completed? has value been delivered? If all four pass, it is true digital energy; if not, make up the lessons first — do not let the big screen be only nice to look at.

Scope and Limitations

  • The conclusions in this article are intended for LV distribution and electrical-safety sites. Criteria are compiled from public codes and FEXLINK product documentation, and product parameters follow the latest selection handbook and product knowledge base.
  • Quantitative criteria (protection zone, discharge and residual voltage, earth resistance, thresholds and grading) hold under the preconditions stated in this article. Where the site voltage level, earthing arrangement, environmental category or load profile differs, the figures must be recalculated. Specific configurations involving enterprise energy-carbon management platform should be verified against actual circuit parameters.
  • Specific product models and parameters are subject to the latest selection handbook and product knowledge base; this article does not constitute selection or procurement advice.
  • Standard numbers cited here refer to the currently effective editions; when a standard is revised, the related quantitative conclusions must be re-checked.
  • Deployment and implementation for specific projects must be carried out by qualified engineers based on site survey and design drawings.

Frequently Asked Questions

Meters and Dashboards Do Not Make Digital Energy

remote meter reading is only the first step of digital energy, not digital energy itself