Direct Answer
Where does the carbon emission factor come from? When calculating the carbon, use the measured value or the latest regional grid average factor first, with the national default only as the fallback — the year and the base of the factor directly determine the credibility of the carbon result and must be recorded — the large difference between the two inventories of the same enterprise is often not the energy change but the factor change — with the factor right and the record complete, the result is comparable and traceable.
A scenario: An enterprise used the national default last year and the regional value this year — for the same electricity, the carbon differs by nearly 20% — the difference cannot be explained in the comparison. The logic is that the factor is "the ruler of the conversion" — the ruler changed, so the result changed — the source, the year and the base must be recorded — the difference is explainable and traceable.
1. The Three Sources of the Factor
The measured value — self-tested or commissioned: the closest to the reality but costly and limited; The regional grid value — by the regional grid average: balancing the precision and the availability — common in the inventory; The national default — the national average: the general fallback — lower precision; The priority — the measured first, the regional second and the default as the fallback.
In one sentence: the three sources — the measured the most accurate, the regional common and the default the fallback — the order: measured > regional > default.
The source comparison table:
| Source | Precision | Cost | Application |
|---|---|---|---|
| Measured | High | High | Key sources |
| Regional grid | Mid-high | Mid | Purchased power |
| National default | Mid-low | Low | Fallback/simple |
The ways of the measured value — commissioning the third-party testing per the standard; using the fuel supplier report; regular internal sampling — the three ways by the source importance. An example: An enterprise uses the regional value for the power and the measured for the boiler — the key source measured and the general regional — the precision and the cost balanced. The logic is that the factor taking is a "graded strategy" — the key source measured and the general regional — a balanced precision and cost makes the result practical and credible.
2. The Difference between the National and the Regional Factor
The national factor — the national average: the overall level without the regional difference; The regional factor — published by the region: reflecting the local structure (the thermal/hydro/new-energy share); The source of the difference — the different structures: a higher thermal share gives a higher factor; The magnitude — tens of percent between the regions: a wrong region gives an obvious deviation.
In one sentence: the national sees the average and the regional sees the structure — a higher thermal share gives a higher factor — a wrong region gives an obvious deviation.
The regional reference — the Chinese grid is divided by the region (e.g. North China, East China, Central China and South China) — take the factor by the region — the cross-region purchase by the supply grid — the region matched, the result is accurate. An example: An enterprise in a high-thermal region — the national average gives a lower result — the regional factor raises the carbon obviously — the report base is right. The logic is that the factor must "match the region" — the national-regional difference is the structure difference — take the factor by the region and the result fits the reality.
3. The Meaning of the Yearly Update of the Electricity Factor
The background — the grid structure changes yearly (the new-energy share rises): the factor falls; The effect — the same electricity with different year factors: the carbon falls yearly — reflecting "the electricity turning green"; The meaning — the falling factor lowers the Scope 2 automatically: the value of the green and the grid cleaning; The report requirement — note the factor year: the different years are not directly comparable.
In one sentence: the grid is turning green and the factor is falling — the same electricity gives a lower carbon yearly — note the year and the cross-year comparison holds.
The enlightenment for the neutrality path — the falling factor lowers the Scope 2: the pressure relieved; but the long-term account should estimate by the target-year factor: not extrapolate with the current one — include the trend in the planning. An example: An enterprise has the same electricity for three years — the factor falls yearly — the carbon falls 5% yearly — the report notes each year — the trend says "the electricity is turning green". The logic is that the yearly update is "the signal of the grid cleaning" — the fall is not necessarily the saving but the grid — with the year recorded, the trend is interpreted right.
4. The Effect of the Factor Value on the Scope 2 Result
The formula — the Scope 2 = the electricity × the factor: the factor is multiplied directly; The magnitude — a 10% factor difference gives a 10% result difference: sensitive; The scenarios — the default-regional difference, the year difference and the location-market difference — the same electricity with multiple results; The management — a unified factor and the version record: the difference explainable.
In one sentence: the factor is multiplied directly — a 10% difference gives a 10% — unified and recorded, the difference is explainable.
The effect table:
| Factor | Scope 2 (illustrative) | Difference |
|---|---|---|
| National default | 1000 tCO₂ | Baseline |
| Regional value | 1150 tCO₂ | +15% |
| Latest year | 950 tCO₂ | -5% |
The record elements of the value — the number, the source file (standard/notice/report), the publication year, the region and the date — the five complete, the value reproducible. An example: The same electricity of an enterprise: the default 1000, the regional 1150 and the latest 950 — the three right with different bases — the report notes "the regional value of a year" — the difference explainable. The logic is that the "multiple results" of the Scope 2 are a base issue not a calculation error — with the value noted, the result is reproducible — the record is the "manual" of the carbon.
5. The Factor Library and the Version Record
The library — by the energy and the region: the electricity/gas/oil/heat separated; The version record — each factor records the source, the year and the version: traceable; The update mechanism — the official update enters the library in time: the old and the new compared and recorded; The report output — the factor list attached: the source, the year and the value all listed.
In one sentence: the library manages "which value" and the version record manages "why this value" — the source, the year and the version checkable — the carbon traceable.
The library management table:
| Element | Requirement | Note |
|---|---|---|
| Type | Separated | Complete |
| Source | Recorded | Traceable |
| Year | Version year | Comparable |
| Update | In time | Current |
The permission and the review — the change reviewed by a specialist (the source and the year); the unified version after the release; the quarterly consistency review — the change controlled, the version stable. An example: The factor library of an enterprise records "source: the regional published value of a year" — the old version kept after the update — the report attaches the factor list — each is checkable at the verification. The logic is that the library is "the ledger of the carbon" — which value, why and when — all recorded, the verification passes once.
Back to the smart energy-carbon platform and the ESA full-element meter — the automation of the factor and the record: the platform embeds the library (separated and sourced), the ESA meter matches the electricity with the year factor automatically and the old/new versions are kept automatically — the factor right and the record complete — the enterprise inventory starts with the well-managed library.**
Scope and Limitations
- The conclusions in this article are intended for LV distribution and electrical-safety sites. Standard numbers (GB/T 32150) refer to their currently effective editions, and product parameters follow the latest FEXLINK selection handbook and product knowledge base.
- Quantitative criteria (protection zone, discharge and residual voltage, earth resistance, thresholds and grading) hold under the preconditions stated in this article. Where the site voltage level, earthing arrangement, environmental category or load profile differs, the figures must be recalculated. Specific configurations involving ESA all-element smart meter should be verified against actual circuit parameters.
- Specific product models and parameters are subject to the latest selection handbook and product knowledge base; this article does not constitute selection or procurement advice.
- Standard numbers cited here refer to the currently effective editions; when a standard is revised, the related quantitative conclusions must be re-checked.
- Deployment and implementation for specific projects must be carried out by qualified engineers based on site survey and design drawings.
Frequently Asked Questions
Where Do Emission Factors Come From—and How Much Does the Choice Move Your Carbon Number?
When calculating the carbon, use the measured value or the latest regional grid average factor first